You don't have to run around trying to find writable CD's or USB optical drives to build a physical Sophos UTM device. That's all there is to it! Once the installation finishes you can remove the USB drive and reboot. If you run into an installation error, see the troubleshooting section below. Press Alt + F1 to switch back to the installer and carry on with the installation. Mount your USB drive with the following command: This will switch you to a console screen. The Sophos UTM installer should start and display the black Welcome screen. Press Enter to start the installation.Īt the blue Introduction Screen press Alt + F2. This can normally be accessed by pressing the Del or F2 key during POST. Insert your USB drive into your device, in my case a Dell PC, power it on and invoke the boot selector by pressing F12 and then selecting the USB drive option. Depending on the hardware, you may find it automatically boots from USB or you might have to access the BIOS and set it as the preferred boot device. We will use the console the mount the USB drive, making the files available, and then switch back to the installer and continue from there. To do this we are going to switch between the installer and a console session. For it to make use of files on the USB drive, the drive needs to be mounted. When the system boots from the USB drive it will be running an installation subset version of Linux. The process take a few minutes and will notify you when it has completed.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |